Nowadays, it is very important to choose a good curtain rod for decoration. It is the bridge of curtains and the guarantee of safety. When we choose curtain rods, we always choose good quality and durable materials. Such a curtain rod is not easy to damage, it takes a long time to use, and it does not need to be replaced frequently. Let me tell you about the curtain rod installation process? Curtain rod installation preparations?
Now it is very important to choose a good curtain rod for decoration. It is the bridge of curtains and the guarantee of safety. When we choose curtain rods, we always choose good quality and durable materials. This kind of curtain rod is not easy to damage, it takes a long time to use, and it does not need to be replaced frequently. Let me tell you about the curtain rod installation process? Curtain rod installation preparations?
Curtains Rod installation process?
After choosing the curtain rod, the following is to know the installation process. The installation process is also an important aspect, you have to understand it, and then observe by yourself
1. Determine the installation height and width: Before installing the curtain rod, first determine its installation position. That is, the installation height and width. The width of the curtain rod can be determined by the width of the window, which is 20-30cm more than the width of the window on both sides.
2. Inspection and treatment of embedded parts: After finding the line, check whether the position, specification, and embedded method of the embedded fixing parts that fix the curtain box can meet the requirements of installation and fixing.
3. Install the curtain rod: Correct the connection fixture, install the rod or wire, and pull it on the fixture. Make it flat and straight with the same room elevation; install standard curtain track, the base width should generally be above 15CM, and the single track can be reduced according to appropriate circumstances.
4. Positioning by drawing lines: Considering the firmness of the fixation and avoiding that the spacing of the fixing parts is too large to bear the tension, the worker master B first measures the size of the required installation track, and then calculates the distance between the fixing holes. Generally, the distance between the fixing parts is not more than 50 cm, and then draw the line for positioning. The accuracy of positioning is related to the success or failure of the curtain installation.
Preparation for installing the curtain rod?
It is important to do the preparation work well before installing the curtain rod.
1. Check and process embedded parts: After finding the line, check the position, specification and pre-embedded method of the embedded fixing parts of the curtain rod to see if they can meet the requirements for installing and fixing the curtain rod , For places where there are errors in elevation, flatness, etc., they must be dealt with immediately.
2. Check the processed products: For the processed products that have entered the site, you need to check their variety, specification, structure, etc. According to the requirements of the drawing, the curtain rod can be installed only after positioning and leveling the line, and finding the structural relationship.
The above is the editor’s detailed introduction to the curtain rod installation process? Curtain rod installation preparation work, I hope you can refer to the editor’s writing to choose the material that suits you during the decoration process. Add a color to your family