Curtain rod installation steps? Curtain rod installation precautions?

Curtains play an important role in people’s lives. It can be said to be a common home decoration. Of course, its function is not just as simple as decoration, except In addition to being able to effectively match the colors in the room, curtains can also protect people’s privacy to a large extent. In the process of curtain installation, the installation of curtain rods is a very important process. In this article, we will introduce to you: Curtains Rod installation steps? Curtain rod installation precautions?

 Curtain rod installation steps?

 Curtain rod installation steps?


 1. The way curtain rods hang curtains, curtain rods are divided into those with and without rings. The curtain rod with hanging ring is used to directly hang the curtain processed by the cloth belt, and it is enough to directly install the finished curtain on the four-legged hook and hang it up. Curtain rods without rings are mainly used to hang curtains that are punched or threaded. Curtain rods with hanging loops need to be assembled before installation.

 2. Determine the installation width and height of the curtain rod.   Before installing the curtain rod, first determine its installation position. That is, the installation height and width. The width of the curtain rod can be determined by the width of the window, which is 20-30cm more than the width of the window on both sides. The installation height of the curtain rod is different from the obvious rod and the dark rod. The installation height of the bright rod is at the middle position between the ceiling and the window frame, and the dark rod is at the top of the curtain box, or installed on any part of the curtain box.

 3. Positioning and drilling, Considering the firmness of the fixation, avoid too large spacing between the fixing parts and cannot withstand the tensile force. It is necessary to calculate the distance between the fixing holes first. If it is greater than 50cm, then draw a line to locate it. After the installation and fixing position is determined, it is necessary to drill holes and fill in expansion screws. If it is a wooden base, there is no need to drill holes, and it can be fixed directly with self-tapping screws.

 4. Install the curtain rod. For the Roman rod, after positioning and drilling the holes, you can fix the mounting frame first, and then place the rod on the mounting frame. And if it is a curtain rail, directly fix the assembled curtain rail to the wall or ceiling with side or top codes.

 Curtain rod installation precautions?

 1. Level, The price is getting higher and higher, but the quality is getting worse, It is certain affordable housing and housing under construction. I have seen a roof that slopes 10cm, a floor that is uneven with a difference of 5cm after the floor tiles are laid, and a wall that is trapezoidal. It is best to use a spirit level or level pipe when installing.

 2. The effect of high roof is good. Because the aesthetic feeling of the exposed curtain rod is to be expressed, the top of the room and the windows should have a certain height to avoid the feeling of compressed vision. When installed on the wall (referred to as wall installation), the Roman rod is about 6-12cm away from the roof or ceiling to avoid feeling of depression and suffocation; when installed on the roof or ceiling (referred to as top installation), the Roman rod is about 6-10cm, to prevent the curtain from rubbing against the wall and staining the curtain when opening and closing.

 Curtains play an important role in people’s lives. Colorful curtains bring more colors to our room. It has the finishing touch, but many people will have such questions when installing curtain rods: Curtain rod installation steps? Curtain rod installation precautions? I believe that through the introduction of this article, everyone will have a better understanding of it.

Shopping Cart