, ,

Kompact Kamp Motorcycle Swivel Heim Hitch Coupler

$239.99 on Amazon.com (as of November 16, 2026, 6:47 PM EST) View details ↗

The Kompact Kamp Motorcycle Swivel Heim Hitch Coupler features a design that allows 360-degree pivoting beyond normal coupler rotation. This complete assembly includes the trailer-side swivel coupler with heim joint, a hitch post with a 3/4″ mounting stud, a rubber cushioning washer, and a hitch post lock. The assembly is constructed with an aluminum block housing, a high tensile stress-proof steel shaft, and a stainless steel hitch post, while the coupler and heim component weigh a combined 2 lbs.

This unit fits all Kompact Kamp trailers as well as any trailer tongue with an inside dimension of 1-3/4″ x 1-3/4″. The swivel bolt mounting holes must be spaced 2-1/4″ apart within the tongue. It is not compatible with Bushtec's 5/8″ swivel coupler or hitch pin. The existing mounting hardware and safety chains from your original setup can be reused, as they are not included in this package.

Installation requires removing the old coupler, checking the tongue tubing for burrs near the mounting holes, and positioning the swivel heim with the wire cutout directed toward the bottom. Bolts are reinstalled through the tongue, swivel coupler, and safety chains, secured with lock washers and nuts torqued to 30 ft. lbs. The swivel heim is threaded all the way in by hand to the swivel block and then backed off by 1 full turn. The component comes pre-greased, with provisions to add automotive bearing grease as needed.

Item Weight2 lbs (Coupler and Heim only)
Hitch Post Mounting Stud3/4″
Tongue Inside Dimensions1-3/4″ x 1-3/4″
Swivel Bolt Mounting Hole Spacing2-1/4″
Recommended Torque30 ft. lbs.
MaterialsAluminum block housing, high tensile stress-proof steel shaft, stainless steel h
What trailer tongue dimensions are required for this swivel coupler?
It fits all Kompact Kamp trailers and any trailer tongue with an inside dimension of 1-3/4″ x 1-3/4″, requiring swivel bolt mounting holes to be 2-1/4″ apart.
What components are included in the package?
The kit includes the trailer-side swivel heim coupler, a bike-side hitch post, a rubber cushioning washer, and a hitch post lock.
Are the safety chains and mounting hardware included?
No, mounting hardware and chains are not included and must be reused from your original coupler setup.
Shopping Cart