What is the installation standard for curtain Roman rods

Curtain Roman rod is an indispensable part of beautiful curtains, it can make the curtains decorative function to the fullest, so its selection and installation are very important. The following editor will let you know the installation standards of curtain Roman rods by introducing the installation steps and installation precautions of curtain Roman rods.

Roman Rod Installation Steps for Curtains

①Draw the line: to install the curtains The lower support is used as a standard marking line, and the positioning line of the support and the position line of the hole are drawn. With 3 supports, the middle support is located on the window or wall, and the two ends must be equidistant. The supports at both ends are about 15-20cm away from the wall or 5-10cm away from the end of the Roman rod.

②Drilling: When installing the Roman pole, the drilling depth should be between 3.5cm and 5cm. After the water pipe is punched, press the plastic expansion tube into the hole.

③Installation rod: The support is fastened with self-tapping screws; the lifting ring is inserted into the rod, and the lifting ring is divided into two, leaving one ring at each end; press the Roman rod into the open support, Adjust so that the distance between the decorative heads at both ends and the wall is the same.

④ Hanging curtains: After the curtains are put on the hook, just hang one end of the hook into the hole of the hanging ring. Whether it is flexible and whether the height of the two curtains is the same.

Precautions for installing Roman curtain rods

①Level: Housing prices are increasing, but the quality is declining. The roof is inclined about 10cm, and the unevenness of the ground after laying the floor tiles is 5cm, and the wall presents a trapezoidal shape. Therefore, it is best to use a level and a level tube when installing the Roman pole.

②Roof height: In order to show the beauty of exposed Roman poles, you must pay attention to the height of the top of the room and the windows to avoid a sense of depression and suffocation.

When installed on the wall, that is, the wall is installed, and the horse pole should be about 6cm to 12cm away from the roof and ceiling. When installed on the roof and ceiling, referred to as top installation, the Roman rod should be about 6cm to 10cm away from the wall, so as to prevent the curtain from rubbing against the wall and staining the curtain fabric when opening and closing the curtain.

③Leave room: During the installation process, the left and right sides of the window frame should not be lower than 6cm. window. When the curtain cloth covers the entire wall, the length of the Roman rod (excluding the decorative heads at both ends) is about 18-22cm shorter than the net width of the room. After installation, there is a gap of about 2-2 cm between the decorative head of the Roman rod and the wall. -6cm, which is the so-called “leaving room for success”.

The above editor introduced the installation standards of curtain Roman rods from the installation steps and installation precautions of curtain Roman rods, hoping to be helpful to everyone in the installation of curtain Roman rods. In addition, if you still can’t install after reading these contents, it’s better to ask a professional installer to install it.

Shopping Cart