The society is constantly developing, and everyone values their own quality of life. Then, curtain rods are indispensable in daily life. Now many people want to make their own curtain rods. So, how to make one What about the curtain rod? What is the installation method of the curtain rod? Let’s take a look together below, I hope it will be helpful to everyone.
1. How to make your own curtain rod
Prepare related materials, such as wooden sticks, metal shaft heads with screws, hanging scrolls, etc. Friends who want to decorate wooden sticks can also prepare some paint. First, paint the wooden stick with a layer of paint evenly (this can prevent moths). After drying, use a hand drill to drill small holes on both ends of the wooden stick. . After drilling the small hole, we screw the nut on the shaft head into the screw hole first, and fix it at both ends of the wooden rod. Then align the screw on the shaft head with the small hole of the nut, and then carefully screw it into both ends of the wooden rod (do not twist it sideways), so that the shaft head will be fixed on the wooden rod, and the simple curtain rod is made.
Second, the installation method of the curtain rod
1, the method of hanging the curtain on the curtain rod
The curtain rod is divided into a hanging ring with and without rings. Curtain rods with hanging rings are used to hang curtains processed with cloth belts. Just put the finished curtains on four-legged hooks and hang them up; while curtain rods without rings are mainly used for hanging perforated or threaded curtains. curtains. This mainly affects whether the hanging ring needs to be assembled when the product is installed.
2. Determine the installation width and height of the curtain rod
Before installing the curtain rod, first determine its installation position. That is, the installation height and width. The width of the curtain rod can be determined by the width of the window, which is 20-30cm more than the width of the window on both sides. The installation height of the curtain rod is different from the obvious rod and the dark rod. The installation height of the bright rod is at the middle position between the ceiling and the window frame, and the dark rod is at the top of the curtain box, or installed on any part of the curtain box.
3. Line drawing and positioning
Considering the firmness of the fixation, avoid too large spacing between the fixing parts and cannot bear the tension. Worker B first measures the size of the required installation track, Then calculate the distance between the fixing holes. Generally, the distance between the fixing parts is not more than 50 cm, and then draw the line for positioning. The accuracy of positioning is related to the success or failure of the curtain installation.
4. Inspection and treatment of embedded parts
After finding the line, check whether the position, specification and embedded method of the embedded fixing parts that fix the curtain box can meet the requirements of installation and fixing. Measures should be taken to deal with errors in elevation, flatness, and distance from the wall.
5. Install the curtain rod
Correct the connection fixture, install the rod or iron wire, and pull it on the fixture. Make it flat and straight with the same room elevation; install standard curtain track, the base width should generally be above 15CM, and the single track can be reduced according to appropriate circumstances.
The above is all the knowledge about how to make a curtain rod and the installation method of the curtain rod introduced to you, I hope it can help you. Whether it is a self-made curtain rod or an installation of a curtain rod, you must first understand it, don’t install it blindly, and choose a suitable curtain rod according to your own structure.
