In home decoration, we should not only pay attention to the overall furniture, but also pay attention to details, such as small items such as switch sockets and doorknobs. In addition, there are many points that need to be paid attention to when installing the curtain rod. The curtain rod is very simple to install, and you can install it yourself. Today, the editor will give you a brief introduction to how to install the curtain rod? What should I pay attention to when installing curtain rods?
1. How to install the curtain rod
1. How to hang curtains on the curtain rod
Curtain rods are divided into those with and without rings. The curtain rod with hanging ring is used to directly hang the curtain processed by the cloth belt, and it is enough to directly install the finished curtain on the four-legged hook and hang it up. Curtain rods without rings are mainly used to hang curtains that are punched or threaded. Curtain rods with hanging loops need to be assembled before installation.
2. Determine the installation width and height of the curtain rod
Before installing the curtain rod, first determine its installation location. That is, the installation height and width. The width of the curtain rod can be determined by the width of the window, which is 20-30cm more than the width of the window on both sides. The installation height of the curtain rod is different from the obvious rod and the dark rod. The installation height of the bright rod is at the middle position between the ceiling and the window frame, and the dark rod is at the top of the curtain box, or installed on any part of the curtain box.
3. Positioning and punching
Considering the firmness of the fixing, avoid too large a distance between the fixing parts and cannot withstand the tension. It is necessary to calculate the distance between the fixing holes first. The distance between them should not be greater than 50cm, and then draw a line for positioning. After the installation and fixing position is determined, it is necessary to drill holes and fill in expansion screws. If it is a wooden base, there is no need to drill holes, and it can be fixed directly with self-tapping screws.
4. Install the curtain rod
. And if it is a curtain rail, then directly fix the assembled curtain rail to the wall or ceiling with side codes or top codes.
2. Precautions for curtain rod installation
1. Precautions for curtain hook installation
If you use curtain hooks to fix curtains, you can use Different installation methods of hooks form different curtain pleats. However, it should be noted that the distance between the curtain hooks should be as uniform as possible, and it should be calculated first; if any rusty hooks are found, replace them immediately, otherwise the curtain fabric will be polluted. In actual use, the number of prongs inserted into the slots can be adjusted, or 3, or 4; the number of strap slots spaced between every two hooks can be adjusted, so that the effective width of the curtain can be adjusted.
2. Ensure stable installation
Bracket, if the bracket is too small, the bracket may be easily damaged. On the other hand, the contact surface between the too small bracket and the wall will be small, and the number of nuts or the size of the nuts will be limited, so that it is easy to make the curtain rod installed Unsafe.
The above are the methods and precautions for installing curtain rods introduced by the editor. Do not install curtains prematurely during decoration to avoid dust on the curtains. Hope the above is helpful to you.
