Curtain rod installation process? Curtain rod installation precautions?

In modern society, everyone will choose to use curtain rods in decoration, and they will encounter many difficulties in the process. I don’t know how to solve it. What I want to introduce today is the installation process of curtain rods? Precautions for installation of curtain rods? I hope it can be helpful to everyone.

 Curtain rod installation process?

 After choosing After the curtain rod, everyone is very concerned about the installation process.

1. Drilling: The depth of drilling is 3.5——5cm. After the hole is punched, press the plastic expansion tube into the hole.

2. Mounting rod: the support is fastened with self-tapping screws; the lifting ring is inserted into the rod, and the lifting ring is divided into two, leaving one ring at each end; press the Roman rod into the opening support , adjust to make the distance between the decorative heads at both ends consistent with the wall.

3. Hanging curtains: put the curtains on the hook, and hang the other end of the hook into the hole of the hanging ring; open and close the curtains left and right, check whether the sliding is flexible, and whether the two curtains are of the same height. Otherwise, fine tune.

4. Scribing: Use the installed support as a standard scribing line to draw the support positioning line and hole position line. With 3 supports, the middle support is located on the window or wall, and the two ends must be equidistant. The supports at both ends are about 15-20cm away from the wall or 5-10cm away from the end of the Roman rod.

Curtain rod installation precautions?

 In the installation, everyone should pay attention to three aspects, and it can be easily done .

1. Roof height: In order to show the beauty of the exposed curtain rod, you must pay attention to the height of the top of the room and the window to avoid a sense of depression and suffocation. ?When installing on the wall, that is, when the wall is installed, the distance between the horse pole and the ceiling should be about 6cm to 12cm. When installed on the roof and ceiling, referred to as top installation, the Roman rod should be about 6cm to 10cm away from the wall, so as to prevent the curtain from rubbing against the wall and staining the curtain fabric when opening and closing the curtain.

2. Leave room: During the installation process, the left and right sides of the window frame should not be lower than 6cm. Live the window.

3. Level: Housing prices are increasing, but the quality is declining. It is affordable housing and self-built housing. Some roofs are inclined by about 10cm, and the unevenness of the ground after laying floor tiles is about 5cm. , the wall presents a trapezoidal shape. Therefore, it is best to use a level ruler and a level tube when installing a curtain rod.

  The above is the editor’s detailed introduction to the curtain rod installation process? Curtain rod installation precautions? own opinion. I hope that the above small writing can be helpful to everyone and create a comfortable and warm family atmosphere for everyone.

Shopping Cart
Available for Amazon Prime