As we all know, curtains are an essential part of a family, so installing curtains is also an important step in house decoration, and many people choose to use them in decoration The key to the installation of Roman rod curtains lies in the installation of the curtain rod. In this article, we will introduce to you: the installation method of the curtain rod? Precautions for the installation of the curtain rod?
Curtain rod installation method?
1. Marking: Use the support under the curtain as the standard marking line, draw the support positioning line and the hole position line. With 3 supports, the middle support is located on the window or wall, and the two ends must be equidistant. The supports at both ends are about 15-20cm away from the wall or 5-10cm away from the end of the Roman rod.
2. Drilling: When installing the curtain rod, the depth of the drilling should be between 3.5cm and 5cm. Of course, there should be no running eyes or skewing; when drilling, keep away from the wires With the water pipe, after its punching is completed, press the plastic expansion tube into the hole.
3. Mounting rod: the support is fastened with self-tapping screws; the lifting ring is inserted into the rod, and the lifting ring is divided into two, leaving one ring at each end; press the Roman rod into the opening support , adjust to make the distance between the decorative heads at both ends consistent with the wall.
4. Hanging curtains: After the curtains are put on the hook, just hang one end of the hook into the hole of the hanging ring, but after hanging the curtains, you should open and close the curtains left and right, check Whether the sliding is flexible and whether the height of the two curtains is the same.
Curtain Rod Installation Precautions?
1. Level: Housing prices are increasing, but the quality is declining. Some houses have roofs that are inclined by about 10cm, and the unevenness of the ground after laying floor tiles is 5cm, and the walls show a trapezoidal shape. Therefore, it is best to use a level ruler and a level tube when installing a curtain rod.
2. Roof height: In order to show the beauty of the exposed curtain rod, you must pay attention to the height of the top of the room and the window to avoid a sense of depression and suffocation.
When installed on the wall, that is, the wall is installed, and the distance between the horse pole and the ceiling should be about 6cm to 12cm. When installed on the roof and ceiling, referred to as top installation, the Roman rod should be about 6cm to 10cm away from the wall, so as to prevent the curtain from rubbing against the wall and staining the curtain fabric when opening and closing the curtain.
Three. Leave room: During the installation process, the left and right sides of the window frame should not be lower than 6cm. Live the window. When the curtain cloth covers the entire wall, the length of the Roman rod (excluding the decorative heads at both ends) is about 18-22cm shorter than the net width of the room. After installation, there is a gap of about 2-2 cm between the decorative head of the Roman rod and the wall. —6cm
With the improvement of people’s living standards, there will be more and more curtain rod materials on the market today, and the installation of curtain rods with different materials and styles will be different. It is better to ask a professional installer to install it.
The installation of curtain rods is also an essential step in home decoration. Most of them exist in the last step of house decoration. Finish. In life, many people choose to install curtain rods by themselves. Then, how to install curtain rods? Precautions for curtain rod installation? I hope that through the introduction of this article, I can provide you with some help.