Sturdy Built 3750lb Galvanized Trailer Axle 84″ Hubface
$428.98 on Amazon.com (as of November 16, 2026, 7:39 PM EST) View details ↗
Manufactured by Autoflex Knott, this galvanized boat trailer axle features a 3,750 lb weight capacity and a structural V-bend in the center to provide additional clearance for a boat hull. The assembly is constructed from hot-dipped galvanized steel tubing measuring 2″ x 2″ with a 1/4″ thickness, and includes built-in drainage holes designed to allow trapped water to drain out of the tubing. It is equipped with a 4-hole brake flange that accommodates the installation of drum or disc brakes, along with adjustable spring seat centers. Two galvanized bolt-on spring seats are included with the unit to assist with installation.
The pre-installed galvanized idler hubs utilize a standard 1 3/8″ x 1 1/16″ bearing combination consisting of inner bearing number 68149 and outer bearing number 44649, paired with a grease seal featuring a 1.719″ inner diameter. These hubs are configured with a 5 on 4.5″ bolt pattern, matching most standard 5-bolt trailer tires and wheels. The hub face measurement, taken from the outside of one hub to the outside of the opposite hub, is 84″ to determine tire placement relative to the trailer frame.
The spring center mounting points accommodate trailers with a measured distance of 66″ to 71.5″ between the centers of the leaf springs. Proper alignment relies on matching these measurements to the existing trailer setup. The physical dimensions of the packaged item measure 96″ x 4″ x 4″, and the entire assembly has a stated item weight of 48 lbs.
| Weight Capacity | 3,750 lbs |
|---|---|
| Hub Face Measurement | 84″ |
| Spring Center Range | 66″ to 71.5″ |
| Bolt Pattern | 5 on 4.5″ |
| Item Weight | 48 lbs |
| Product Dimensions | 96″ x 4″ x 4″ |






