There is a big difference between having curtains and not having curtains in home life. Curtains can play a very good decorative effect, not only to protect privacy, but also to improve the quality of the home. The curtain rod is an essential part of installing curtains. So, how to install the curtain rod? What are the precautions for the installation of the curtain rod? Does everyone know? Next, let the editor give you a specific introduction.
How to install the curtain rod?
1. Curtain rod Ways to hang curtains
Curtain rods are divided into those with and without rings. The curtain rod with hanging ring is used to directly hang the curtain processed by the cloth belt, and it is enough to directly install the finished curtain on the four-legged hook and hang it up.
Curtain rods without rings are mainly used to hang curtains that are punched or threaded. Curtain rods with hanging loops need to be assembled before installation.
2. Determine the installation width and height of the curtain rod
Before installing the curtain rod, first determine its installation position. That is, the installation height and width. The width of the curtain rod can be determined by the width of the window, which is 20-30cm more than the width of the window on both sides. The installation height of the curtain rod is different from the obvious rod and the dark rod. The installation height of the bright rod is at the middle position between the ceiling and the window frame, and the dark rod is at the top of the curtain box, or installed on any part of the curtain box.
3. Positioning and punching
Considering the firmness of the fixation, avoid too large a distance between the fixing parts and cannot withstand the tensile force. The distance is not greater than 50cm, and then draw a line for positioning. After the installation and fixing position is determined, it is necessary to drill holes and fill in expansion screws. If it is a wooden base, there is no need to drill holes, and it can be fixed directly with self-tapping screws.
4. Install the curtain rod
For the Roman rod, after positioning and drilling the holes, you can fix the mounting frame first, and then place the rod on the mounting frame. And if it is a curtain rail, directly fix the assembled curtain rail to the wall or ceiling with side or top codes.
What are the precautions for curtain rod installation?
1. Depending on the situation, use different connection methods
If the wall is made of wood, just put the screws of the installation track directly on the determined position of the wood.
If the wall is made of cement, you need to use an electric drill to drill a hole at a certain position, then knock in the special nylon expansion tube, and then insert the screw into the special nylon expansion tube and tighten it.
2. Precautions for installing curtain hooks
If you use curtain hooks to fix the curtains, you can use different installation methods of the hooks to form different curtain pleats. However, it should be noted that the distance between the curtain hooks should be as uniform as possible, and should be calculated first; any rusted hooks should be replaced immediately, otherwise the curtain fabric will be polluted. In actual use, the number of pins inserted into the slots can be adjusted, or 3, or 4; the number of strap slots spaced between every two hooks can be adjusted, so that the effective width of the curtain can be adjusted.
3. Make sure the installation is firm
Don’t install it, it will fall off after a while, which is not good, so when installing, pay attention to choose the bracket that matches the pole, If the bracket is too small, the bracket may be easily damaged. On the other hand, if the bracket is too small, the contact surface between the wall and the wall will be small, and the number of nuts or the size of the nuts will be limited, which will easily make the installed curtain rod unstable. .
4. Ensure specification and level
The length of the curtain rod should be greater than the width of the window cover to avoid light leakage;
5. Timing for curtain rod installation
It is a good choice to install the curtain rod after the new house has been opened up or before the last cleaning. It was thick with dust, and it was too late to clean up and wasted. At the same time, the Roman rod is best matched with the curtains, while the curtain rails can be installed in advance, and what kind of rails to install should be considered when the decoration is finished.
The method of installing curtain rods is actually relatively simple. Read the above introduction, do you know how to install curtain rods now? There are still many details to pay attention to in the installation of curtain rods. You must be more careful when installing. Now you can go home and try to install it yourself. How to install the curtain rod? What are the precautions for the installation of the curtain rod? You should have no doubts.
